3/4" Drive Breaker Bar - Alloy Steel - 19" Long

Video Transcript for Review of Performance Tool Tools - Breaker Bar - PT58ZR

Ellen: Hey everybody. I'm Ellen here at etrailer.com. We're taking a quick look at the three-quarter-inch Drive Breaker Bar. This is going to help to make it easier to remove any kind of lug nuts on your RV, trailer, vehicle, or anything else. A typical job that needs to have a lot of leverage, lug nuts are our one really common job like that. But anywhere that you need to have a little bit higher torque, a little longer handle to get the leverage that you need, this is going to be great for.Again, it's going to be a three-quarter inch drive, so it'll work with your three-quarter-inch sockets.

So pretty simple, as far as that goes. It does have the swivel head to allow you to get the angle that you need. So as you're loosening or tightening, and you put that on there, flip it around, and you can just swing it over and so on. That makes it a little bit easier to work with. It is a nickel chrome-plated steel, so it should be pretty resistant to any kind of corrosion.

That is a chrome vanadium alloy steel, so it should be pretty durable over time.As far as the length, give you a measurement here. It's about 19 inches long from the center of the drive. So to the very end of the handle to right there, that gives us 19 inches The total length for storage, if you have it all the way flat, it's about 21-3/8 and about 1-3/4. That's pretty much all there is to it for our quick look at the three-quarter-inch Drive Breaker Bar. I hope this has been helpful in deciding if this is the right tool for you.

We do have a lot of other tools here at etrailer.com and all kinds of parts and accessories for your trailers RVs and more, so be sure to check them out. Thanks for watching..